Lennox Heating & Furnace in Houston: What to Know First
Fireside Heating & Air Co. of Houston provides independent Lennox heating and furnace service, repair, and replacement across Harris County. Most Lennox furnace repairs run $150-$700, and we complete the majority in a single visit with the parts on our trucks. The price we quote is the price you pay, whether we show up Tuesday afternoon or Sunday at midnight.
This page is for Houston homeowners who already own a Lennox furnace or heat system and need straight talk about what’s failing, what it’ll cost, and who’s qualified to fix it right. If your Lennox is blowing cold air, short-cycling, or won’t fire at all, call (833) 313-7291. A live person answers, 24 hours a day.
How Lennox Products Fail - and How We Fix Them
- EL296V and EL195E: SureLight® ignitor burnout. These high-efficiency Lennox furnaces use a silicon nitride hot-surface ignitor that cracks after repeated thermal cycling. In Houston, where systems sit idle through long shoulder seasons then fire hard in January, we see this more than in northern climates. We carry OEM ignitors on every truck and test flame-sensor microamps before we leave, because a weak ignitor often masks a dirty sensor.
- ML180 and ML193: cracked heat exchangers in older units. These single-stage workhorses from the mid-2000s run long cycles in Houston’s mild winters, and the constant expansion and contraction stress the clamshell heat exchanger at the weld seams. We scope every suspected crack with a borescope camera, document it with photos, and never quote a patch job. If it’s cracked, we shut the gas off and walk you through replacement options, same day.
- SLP98V and SL280V: pressure switch and flue issues. Lennox’s variable-capacity furnaces depend on precise pressure differential readings. Houston’s humidity corrodes the silicone tubing and the barbed fittings on the collector box crack from heat fatigue. We replace with OEM tubing rated for the full condensing temperature range, not generic vinyl that’ll harden again in two seasons.
- Signature Collection (SLP99V): communicating control board failures. The iComfort®-enabled board is a proprietary Lennox part, and aftermarket substitutes often drop the variable-output staging to single-speed. We source genuine Lennox boards or pre-programmed equivalents that retain full modulation. We’ve learned the hard way that saving $80 on a board costs a callback and a frustrated customer.
- G61 and G71: inducer motor bearing wear. These earlier two-stage Lennox units use a specific Genteq inducer with a sleeve bearing that dries out in Houston’s attic heat. The motor doesn’t fail completely, it just draws high amps and throws erratic pressure readings. We measure amp draw against the spec plate, replace the full inducer assembly when it’s out of range, and verify the condensate trap is clear so acidic water isn’t backing into the housing.
Our Lennox Heating & Furnace Process
- 1
You call, we answer. A live person picks up, notes your model and serial number if you have it, and dispatches a technician. No voicemail tree, no “we’ll call you back Monday.”
- 2
Diagnostic on arrival. Randall or one of our journeymen pulls the blower door, checks the fault code history, and tests every safety in sequence. We don’t guess on Lennox systems, the board tells us most of what we need if we read it right.
- 3
Parts decision, explained. If it’s a warrantied component, we note that. If it’s out of warranty, we show you OEM versus quality aftermarket options and explain where each makes sense. Some Lennox parts, like communicating boards, have no reliable substitute. Others, like pressure switches, do.
- 4
Repair with the truck stock. We carry the twenty most common Lennox furnace parts, so most jobs finish in one visit. If it’s a special-order item, we secure it next-day and leave you with temporary heat if safe.
- 5
Combustion test and written guarantee. We fire the system, measure CO and O2 with a digital analyzer, and hand you the 90-Day Done Right Promise in writing. If it’s not right, we make it right. No paperwork to file, no arguing.
- 6
Cleanup and straight talk. Shoe covers off, floor swept, and an honest assessment of how many seasons your Lennox has left. We’ll tell you if you’re throwing good money after bad.
What Lennox Heating & Furnace Costs in Houston
Most Lennox furnace repairs in Houston fall between $150 and $700. A failed ignitor on an EL296V runs toward the lower end. A heat exchanger replacement on an ML180 usually pushes the upper range, and often makes more sense to put toward a new system.
What moves the price: the specific Lennox part (communicating boards cost more than standard ignition modules), whether the job requires attic work in July, and if we need to pull a permit for gas line modification. Houston’s humidity also means we sometimes find secondary issues, corroded flame sensors or clogged condensate drains, that need addressing while we’re in there.
Our $89 Seasonal Tune-Up catches most of these before they become emergency calls. For any repair over $250, we take $50 off. And we always provide a free second opinion if you’ve got another company’s written estimate in hand.
Call (833) 313-7291 for an exact quote on your Lennox system. Estimates are free, and the price quoted is the price paid.
Why Houston Homeowners Call Fireside Heating & Air Co. of Houston for Lennox Work
We’ve worked on Lennox systems in Houston since 2018, from the old G-series furnaces in Garden Oaks homes to the variable-capacity SLP99V units going into new builds past Beltway 8. Randall Becker grew up in Acres Homes, learned this trade at San Jacinto College, and still carries the habit of quoting one price whether it’s Tuesday afternoon or a holiday weekend.
Our technicians are trained on nine major brands, Lennox included, but we don’t stop there. We also service Carrier, Trane, and the others, so if your Lennox has reached the end of its useful life, we can give you straight comparisons without pushing one manufacturer. The 90-Day Done Right Promise covers every repair. Phones are answered by a live person, 24/7. And our senior and veteran customers always receive 5% off, no expiration.
Tell me what it’s doing, and I’ll tell you what it needs. That’s how we’ve operated for over 42 years.
FAQs
Does repairing my Lennox furnace void the warranty?
No, proper repair by a qualified technician does not void your Lennox warranty. We use OEM or equivalent parts and document our work, which satisfies Lennox’s requirements. Using uncertified aftermarket components or unlicensed labor can void coverage, which is why we source carefully and keep records. If you’re unsure about your warranty status, call (833) 313-7291 and we’ll look it up with your serial number.
How quickly can you get Lennox parts in Houston?
We stock the most common Lennox furnace parts on our trucks and complete most repairs same-day. For proprietary components like iComfort control boards or specific heat exchangers, we source next-day through our Houston distributors. We won’t leave you without heat if it’s unsafe, we’ll make it work temporarily or discuss replacement options. Call (833) 313-7291 to check availability for your specific model.
Is it cheaper to repair my Lennox furnace or replace it?
If your Lennox furnace is over 15 years old and the repair exceeds $500, replacement usually makes better financial sense. We apply a simple rule: if the repair costs more than a third of a new system and the unit is past two-thirds of its expected life, we recommend replacement. We’ll run the numbers with you, no pressure. Our free estimates include both options so you can decide.
Can you come today for a Lennox furnace that won’t start?
Yes. We answer calls live 24 hours a day, including nights, weekends, and holidays, and we prioritize no-heat emergencies in Houston. Most same-day appointments are scheduled within hours. Call (833) 313-7291 now, a live person will dispatch a technician and give you a real arrival window.
Do you install new Lennox furnaces, or only repair?
We install and replace Lennox furnaces, but we are an independent service provider, not a Lennox dealer. This means we can recommend the best system for your home without manufacturer pressure, whether that’s Lennox, Carrier, Trane, or another brand we service. We’ll size it properly for Houston’s climate and your home’s ductwork, not just sell you the highest efficiency rating. Call (833) 313-7291 for a free replacement estimate.
Written by Randall Becker, Owner & Lead Technician, Fireside Heating & Air Co. of Houston at Fireside Heating & Air Co. of Houston, serving Houston and nearby areas.