Heating & Furnace in Aldine - Fast Local Response, Upfront Pricing

Fast, Reliable Heating & Furnace Across Aldine

Heating and furnace repair in Aldine, TX typically costs $150-$700 for repairs and $80-$200 for tune-ups, with most service calls completed same-day by our Heating & Furnace team. We’ve been driving to Aldine since 1984, and we know the difference between a 1970s slab home off Easthaven Drive and a manufactured home on Aldine Bender Road. When your furnace quits on a January night, you don’t want a dispatcher reading from a map. You want someone who already knows that Green Hills sits a little lower than surrounding areas, or that many of the mobile home parks run on propane conversions that require a different gas valve skill set. We’re Fireside Heating & Air Co. of Houston, and we’ve kept Aldine warm for over 42 years. Call (833) 313-7291 - a live person answers, even at 2 a.m.

Call (833) 313-7291

Why Fireside Heating & Air Co. of Houston Is Aldine’s Preferred Heating & Furnace Company

Aldine is unincorporated Harris County, which means furnace permits and inspections run through county offices rather than a city building department. Our technicians have worked with Harris County inspectors for decades. We know the submission timelines, the common correction items, and the direct lines to get your replacement approved without the runaround you’d face with less experienced outfits.

Our customers in Aldine call us back. They mention our shoe covers without being asked, the way we explain the repair before touching a tool, and the written 90-Day Done Right Promise we leave behind. No paperwork. No arguing. If it’s not right, we make it right.

Response time to Aldine averages under 90 minutes during heating season. We keep common Lennox, Goodman, and Rheem parts on our trucks because we’ve learned what fails here - corroded heat exchangers in uninsulated attics, gas valves gummed up by moisture in aging manufactured-home lines, capacitors still limping from Hurricane Harvey flood damage.

We recently replaced a failed heat exchanger in a Lennox furnace at a 1970s slab home on Easthaven Drive in the Green Hills neighborhood. The original ductwork was undersized and the heat exchanger had cracked from years of thermal stress in Aldine’s humid summers and the 2021 freeze, so we upsized the unit and modified the return plenum. That’s the kind of local knowledge you earn only by doing the work year after year.

Our Heating & Furnace Services in Aldine

Furnace Repair in Aldine

Most Aldine furnace repairs fall between $150-$700, depending on whether we’re replacing a ignitor, cleaning a flame sensor, or tracking down a control board issue. The 1960s-1990s slab homes that dominate Aldine’s housing stock often have furnaces crammed into unconditioned attics or tight closet spaces where heat and humidity accelerate electrical component failure. We carry replacement boards, motors, and sensors for Goodman, Rheem, and York systems on every truck, so we’re not making a second trip while your house gets cold.

Furnace Replacement in Aldine

Because Aldine is unincorporated Harris County, furnace permits and inspections are handled by the county, not a city - so our team coordinates with county inspectors for furnace replacements and heat exchanger approvals, a process that differs from nearby Houston suburbs. We handle the paperwork, schedule the inspection, and don’t leave until the system is signed off. A typical replacement in Aldine runs $3,500-$7,500 depending on size, efficiency, and whether we’re modifying ductwork that hasn’t been touched since the Carter administration.

Furnace Tune-Up in Aldine

Our $89 Seasonal Tune-Up is built for Aldine’s punishment cycle: six months of near-continuous AC runtime followed by sudden hard freezes that expose every weak joint and cracked line. We check heat exchangers for corrosion, test gas pressure, inspect condensate drains for sludge, and verify that your system can handle the next February surprise. Senior and veteran homeowners save an additional 5%, always.

Heat Exchanger Repair & Replacement in Aldine

This is our most called-for specialty in Aldine. Decades of condensation in uninsulated attacks corrode heat exchangers from the inside out. The 2021 freeze finished off many that were already thin. We inspect with cameras, document cracks per manufacturer warranty requirements, and replace with units sized for your actual heat load - not the original 1973 calculation. A cracked heat exchanger is a carbon monoxide risk. We don’t patch them. We replace them, pull the permit, and stand behind it for 90 days in writing.

Gas Valve Repair in Aldine

Manufactured and mobile homes in Aldine face a specific pattern: aging gas lines collect moisture and sediment that gums up valves, causing intermittent ignition or dangerous delayed lighting. Our technicians are trained on propane conversions, low-pressure regulators, and the non-standard clearances common in mobile home installations. We carry replacement gas valves for Lennox and Goodman mobile-home-rated furnaces, and we test every connection with electronic leak detectors before we leave.

Trusted Brands We Service in Aldine

We’re trained to service nine major residential brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Aldine customers, we stock the most common Lennox ignitors, Goodman control boards, and Rheem heat exchanger gaskets on our trucks because these are the brands we see most often in the area’s 1970s-1990s housing stock. If your system is one of the many York units still running in Aldine’s mobile home parks, we likely have the parts already. No waiting on a warehouse in Dallas. Most jobs finish in one visit.

Common Heating & Furnace Problems We See in Aldine Homes

• Corroded heat exchangers from decades of condensation in uninsulated attics. Aldine’s pre-1990 slab homes often have furnaces sitting in attic spaces that hit 140°F in August and drip humidity all winter. The corrosion is invisible until we camera-inspect, and by then the crack has already started.
• Gas valve failures due to sediment and moisture from aging gas lines in manufactured homes. Aldine’s unusually high density of mobile and manufactured homes means we see more propane conversions and low-pressure natural gas systems than most Houston-area techs. The valves degrade slowly, then fail suddenly on the coldest night.
• Frozen condensate lines and cracked heat exchangers from sudden hard freezes like February 2021. Aldine’s thin heating infrastructure - many systems sized only for mild Houston winters - couldn’t handle the sustained sub-freezing temperatures. Units that lacked winter maintenance were especially vulnerable.
• Hurvey-era corrosion in pre-2018 equipment. Hurricane Harvey’s 2017 flooding inundated large swaths of Aldine’s low-lying neighborhoods; many condenser units and air handlers were submerged but never replaced, just dried out and put back in service. We now routinely check for corrosion on contactors and capacitors during any service call on pre-2018 equipment, and we recommend elevating outdoor units on lots with slab heights near the area’s base flood elevation.

Pricing for Heating & Furnace in Aldine, TX

We Also Serve Cities Near Aldine

Our shop dispatches daily to Aldine and the surrounding communities: Jersey Village to the west, Humble to the north, Houston proper to the south, and Bellaire to the southwest. Same live-answer phones, same 90-Day Done Right Promise, same journeyman technicians in uniform. Wherever you are in north Harris County, we’re already familiar with the local permit requirements and housing stock.

FAQs - Heating & Furnace in Aldine